常减压蒸馏装置配剂方法比较

对常减压装置的三种配剂方法进行分析比较，从而选出经济、合理的配剂方法。     

Phenolic compounds from vacuum pyrolysis of wood wastes

Various softwood and hardwood bark residues, primary sludges and softwood sawdust residues were processed by vacuum pyrolysis in a laboratory scale batch reactor. The pyrolysis oil, water, charcoal, and gas were recovered and analyzed. The pyrolysis oils were analyzed in details for their content in phenolic compounds after derivatization to their acetyl derivatives. The influence of temperature, heating rate, feedstock bed thickness, particle size and feedstock water pretreatment on the yield of phenols was investigated. The highest yield of phenols was obtained when hardwood bark was soaked in water for 48 hours and pyrolyzed at a temperature of 450°C and a heating rate of 10°C/min. Pyrolysis performance was evaluated in terms of total phenolic yield and composition.     

湿浸法制备活性组分非均匀分布负载型催化剂过程的计算机模拟

对活性组分非均匀分布的负载型催化剂的湿浸法制备过程进行了计算机模拟,其模拟程度可适用于任意多个活性组分的浸渍。发现单组分浸渍时,通过控制浸渍时间可获得活性组分由薄到厚的蛋壳型分布和均匀分布,但通过预浸渍吸附至一定分布后,再在空白溶液中浸渍洗脱,控制洗脱条件也可获得蛋黄、蛋白型的分布;加入竞争吸附剂,进行双组分及多组分浸渍,通过控制浸渍溶液性质及浸渍时间可获得各种类型的活性组分分布,诸如蛋壳型、蛋白型、蛋黄型和均匀型。通过对制备过程参数(如竞争吸附剂的选择、各组分有效扩散系数、初始浓度、吸脱附速率常数等)与活性组分分布形式之间关系的分析,可实现对任一分布形式的催化剂的制备过程参数的优化。这对实际制备催化剂具有指导意义。     

Effect of different oxygen species originating from the dissociation of O2, N2O and NO on the selectivity of the Pt-catalysed NH3 oxidation

An effect of oxygen species formed from O₂, N₂O and NO on the selectivity of the catalytic oxidation of ammonia was studied over a polycrystalline Pt catalyst using the temporal analysis of products (TAP) reactor. The transient experiments were performed in the temperature range between 773 and 1073 K in a sequential pulse mode with a time interval of 0.2 s between the pulses of the oxidant (O₂, N₂O and NO) and NH₃. In contrast to adsorbed oxygen species formed from NO, those from O₂ and N₂O reacted with ammonia yielding NO. It is suggested that the difference between these oxidising agents may be related to the different active sites for dissociation of O₂, N₂O and NO, where oxygen species of various Pt-O strength are formed. Weaker bound oxygen species, which are active for NO formation, originate from O₂ and N₂O rather than from NO. These species may be of bi-atomic nature.     

太阳能集热器及其适用性浅析

对目前常用的平板型、全玻璃真空管及热管式真空管等太阳能集热器的优缺点进行了介绍,并对各种太阳能集热器进行了综合评价,对其在太阳能热水供应、太阳能采暖和太阳能空调系统中的适用性进行了分析,为太阳能集热器的选择提供了参考.     

木制品真空浸蜡实验研究

主要对在真空的条件下用液蜡作浸溃液、做木块被浸溃物的真空浸溃实验过程作了详细的介绍,分别介绍实验前的准备,实验中的现象及注意事项,试验结论等。然后说明在真空条件下的浸渍质量优于常规浸渍的质量,并得到一些浸渍质量与真空度和浸渍时间的定量关系,从而给出研究高质量浸渍结果的实验方法。     

真空烧结温度对多孔钛影响的研究

以碳酸氢铵做造孔剂,采用真空烧结法制备出生物多孔钛．研究了烧结温度对多孔钛显微形貌、显气孔率、抗压强度的影响．研究表明,提高烧结温度,有利于Ti晶体的发育,并提高制品抗压强度．     

CO2 gasification of wood charcoals derived from vacuum and atmospheric pyrolysis

The gasification of biomass derived char obtained via vacuum and atmospheric pyrolysis of Populus tremuloides has been studied in the ranges of 725–960°C and 0.1 to 6 MPa. CO₂ was used as the oxidizing gas. The results show that char reactivity is influenced by the preheating rates and that pressure effects are significant between 850°C and 950°C. A correlation based on the expression: df/dt = k₀{exp(-E/RT)}(1 - f)^af^βP^yCO₂ was used to fit the experimental data. In general, vacuum pyrolysis derived char showed a higher reactivity than atmospheric pyrolysis chars. An explanation based on a higher oxygen content of the vacuum pyrolysis char is suggested.     

蒸汽喷射真空泵的影响因素及测试罩的应用

实际生产中的影响因素很多 ,诸如蒸汽压力、蒸汽干燥度、冷却水量、冷却水温、冷却水喷嘴堵塞、真空泵泄漏、拉瓦尔蒸汽喷嘴堵塞、泵前工艺设备冷却效果不好等等。但主要的是冷却量、拉瓦尔蒸汽喷嘴和泵前工艺设备的冷却。测试罩安装在真空泵的吸入真空管道上 ,在测试罩上选择不同直径的空气流量喷嘴 ,可以测得真空泵的空气流量喷嘴、抽气量、真空度之间的关系 ,从而可指导正确操作。     

一种高效节能真空电熨斗的研究

为了提高电熨斗的安全性,同时降低其能耗,设计了一种高效节能的真空电熨斗,该电熨斗通过保温装置及真空导热装置,可以实现快速导热及长时间非通电状态下工作,具有安全可靠,高效节能,使用方便,成本低廉的特点,具有良好的市场推广前景。